Merging Pyramix - Final Check Metering; Final Check Window

Final Check Metering : Final Check Metering
13 - 295
Final Check Metering
Scope
Pyramix has an optional plug-in dedicated to precision metering. As the name implies this window brings
together all the tools necessary to ensure that masters conform to the relevant standards.
Final Check enables you to monitor and check a wide variety of mix characteristics objectively. Final Check pres-
ents this information via a simple and easy to read user interface making it easier to be confident that your mix will
conform to the specifications required by your clients.
Final Check Window
Open the Final Check window either by clicking on the icon or View > Windows / Tools FinalCheck Meter-
ing
.
The Final Check Window is presented with two tabbed pages,
Metering and Setup.
In the Upper left-hand corner, the yellow square toggles the plug-in between active and inactive states.
The Window can be resized by clicking and dragging. Double-clicking on the upper boundary maximizes the Final
Check Metering window automatically and sets the window to full screen.
If you are using more than one monitor, it will be maximized on the screen where most of the window was located
previously. Double-clicking again restores to the previous size.
In the upper-right corner the [
X] box closes the Final Check window.