Machine Control : Transport Control Panel
22 - 512
TimeCode Registers
Each TimeCode reference source has two registers:
Reader
register shows show the current TimeCode incoming on the LTC, VITC physical or logical inputs.
Generator register shows the current TimeCode outgoing on the LTC or VITC physical or logical outputs
In the case of
VT, Virtual Transport, the Reader Timecode is the VT TimeCode and the Generator is the TimeCode
reported by Pyramix on the corresponding Pyramix VT client.
Controllers Section
Controllers Online/Offline
When the Controllers button is lit red all connected Controllers are set Offline
Press the button again to toggle to Online.
Offline ensures no External Commands can be sent to Pyramix while a maintenance or housekeeping operation
is in progress.
When performing a
Mix-down, Generating a CD image, or during any Surround encoding operation, Pyramix
automatically sets all controllers offline to ensure the operation is not inadvertently interrupted and to prevent
exaggerated motor fader movements during non real-time processes.
Jog Wheel Mode
Jog
Shuttle
Loop
Navigate
Zoom
Off
To Next Page
Loading...
