Effects and Plug-Ins : Dynamics Processing
14 - 317
The Low LPF is a shelving EQ with a slope of 6dB/Octave and a turnover frequency of 100 Hz, the Medium BPF has
a Q (bandwidth) of 0.8 with a center frequency of 2 kHz, and the High HPF is a shelving EQ with a slope of 6dB/
Octave and a turnover frequency of 8 kHz.
Note: Three Band Tone Control is limited to a maximum of 1FS I.e. 48kHz.
Dynamics Processing
A comprehensive dynamics processing module. Functions available include one gate, one expander, two com-
pressors, one limiter, and a de-esser. The operation of each of these effects is interrelated in this comprehensive
dynamics processor, and the user interface shows the operative dynamic range where each process takes effect.
Output Level Max
This box shows Inactive when auto-gain compensation is on.
Thresholds
Threshold controls set the level above or below which the plug-in will affect the dynamics of the input signal. All
the threshold settings are on the right of the window. From the bottom up, Gate, Expander, Compressor 1, Com-
pressor 2, Limiter, and Input Reference Level.
Reference Level
Sets the input level reference. E.g, setting the reference level to -20 would mean an input level of -20dB is consid-
ered to be the equivalent of unity gain for purpose of calculating the input threshold levels for all dynamics pro-
cesses except limiting. The reference level value is variable between 0dB (unity gain) to -30dB.
Limit
To Next Page
Loading...
