Menus : Cursor & Marks
27 - 618
Nudge Setting 1
Nudge Setting 2
Nudge Setting 3
Nudge Setting 4
Nudge Setting 5
Goto TimeCode
Opens the Goto TimeCode dialog box, which allows the Play Cursor to be positioned to a
specific TimeCode position
Goto Foot Allows the Play Cursor to be positioned to a specific Footage
Goto Beat Allows the Play Cursor to be positioned to a specific Beat
Cursor to Mark In Moves the Play Cursor to the Mark In
Cursor to Mark Out Moves the Play Cursor to the Mark Out
Cursor to Gate In Moves the Play Cursor to the selected Track Group Gate In
Cursor to Gate Out Moves the Play Cursor to the selected Track Group Gate Out
Cursor to Start of Selected Track Moves the Play Cursor to the start position of the first Clip on the selected Track
Cursor to End of Selected Track Moves the Play Cursor to the end position of the first Clip on the selected Track
Auto Center on Goto When enabled, the Project Editor will automatically center the display to the new Play
Cursor position when the Goto TimeCode command is used .
Mark In to Cursor
Moves the Mark In to the Play Cursor
Mark Out to Cursor Moves the Mark Out to the Play Cursor
Gate In to Cursor Moves the selected Track Group Gate In to the Play Cursor
Gate Out to Cursor Moves the selected Track Group Gate Out to the Play Cursor
Marks to Selection Moves the Mark Out to the current selection
Lock Marks Prevents the Mark In/Out points from being changed
Hide Marks Removes the Mark In/Out cursors
Show Cursor Automatically centers the display of the Project Editor to the Play Cursor
Show Mark In Automatically centers the display of the Project Editor to Mark In current position
Show Mark Out Automatically centers the display of the Project Editor to Mark Out current position
Show Gate In Automatically centers the display of the Project Editor to the selected Track Group Gate In
Show Gate Out Automatically centers the display of the Project Editor to the selected Track Group Gate
Out
To Next Page
Loading...
