Settings : Application
28 - 686
mands to the External Machine. The audio is therefore perfectly scrubbed and the external machine follows the
audio as well as it possibly can. When the user stops Jogging, Pyramix automatically returns to chase mode.
Geared Jogging
When checked the jog wheel “gearing” I.e. the amount you have to turn the wheel for a given amount of cursor
movement is related to the current Zoom level.
Jog Speed ceiling
Sets the maximum jog speed from a choice of 1X, 2X, 4X or 8X play speed
Flywheel responsiveness and inertia
Responsive follows the actual movements as sent by the jog wheel. Smooth passes the actual movement
through a smoothing filter. So, when the slider is set to
Responsive the Smoothing Filter parameters have no
effect.
For sound to picture work where tight sync to picture is required use a setting biased to
Responsive. For a more
pronounced flywheel effect choose a
Smoother setting.
The Middle position is a good starting point.
Jog - sensitivity [0.33] second(s) per revolution
Sets the time moved in one revolution of the jog wheel. Type the required value in the box.
Shuttle - sensitivity [2] revolution(s) for nominal speed
Sets the fraction of a revolution or number of revolutions required to maintain nominal speed. E.g. an entry of 0.25
will require a quarter of a turn clockwise to achieve nominal speed.
Navigate - sensitivity [3] revolution(s) to traverse the timeline
Navigate is silent jog mode. Sets the number of revolutions of the jog wheel required to traverse the visible time-
line. I.e. the actual speed varies with the zoom setting.
Geared Jog mute when timeline view range is > 00:00:10:00
Audio will be muted when the TimeLine view range exceeds the value in the register.
Fine Jog sensitivity factor [ ]
Sets the fraction of the regular Jog Sensitivity Setting that will be invoked when Fine Jog is selected in the
Machines > Controllers menu
Mouse Scrubbing Settings
Gives a choice between Analog Tape Mode with two options or Repeat Loop Mode
Analog Tape Mode
gives a similar response to ‘reel-rocking’ on an analogue tape machine.
Jog anyway
When lit, Jog Mode is used regardless of how much audio is visi-
ble in the
Timeline
Shuttle when more than 10 [s] is shown in the Timeline
When lit, if there is more than 10 seconds of audio visible in the
Timeline scrub will be in
Shuttle Mode
Repeat Loop Mode
continuously repeats a short loop starting at the cursor position.
Vari Speed Audio Quality
High when playing less than of equal to [6] track(s)
Best when playing less than or equal to [2] track(s)
Fast Speed Settings
F.FWD and REW nominal speed ratio [20]
Type in the box to set the nominal F. FW D and REW speed. (I.e. a value of 20 means 20 times sync play speed)
To Next Page
Loading...
