Appendices : Appendix IV Optional Features
30 - 736
Would you like to convert this DSD Project into a DXD Mixing Project ?
If the answer is YES the project will be opened in DXD Mixing mode. (Though all your media files will remain in DSD
IFF
format)
If the answer is
NO the project will be opened in DSD mode as it was when created.
Peak Values in DSD and DSDIFF Media Files
Peak Computations
For DXD audio media, the peak displayed in the media Properties page is computed from the audio without a
[20..20kHz] filter.
For DSD audio media (DSDIFF), the peak displayed in the media
Properties page is computed from the audio after a
[20..20kHz] filter.
This could change the behavior of
Auto-scale Waveform and Normalize.
For example:
A DXD file generated from a 1kHz sine @-10dB -> peak = -10dB
A DSDIFF file generated from a 1kHz sine @-10dB -> peak = -9.9dB
To Next Page
Loading...
