NEC Univerge SV9100 - Page 228

Issue 4.0
2-188 Program 15 : Extension, Basic Setup
11
Callback Automatic Answer
Enable/Disable automatic answer
of calls recalling to a station. For
example, if a Transfer Recall or
Hold Recall is ringing back to a
station, the following happens:
If PRG 15-02-11 is enabled, the
station automatically answers the
recall when it goes off-hook.
If PRG 15-02-11 is disabled, a
station does not automatically
answer the recall when it goes off-
hook. The user must first press the
line appearance of the recalling call
or press the answer key.
0 = Off
1 = On
1
12
Off-Hook Ringing
Set the telephone Off-Hook
signaling. Off-hook signaling
occurs when a telephone user
receives a second call while busy
on a handset call. To enable/
disable Off-Hook Signaling for an
extension Class of Service, use
Program 20-13-06.
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset Beep
5
13
Outgoing Caller List Mode
Select whether the Redial List
feature should store internal and
external numbers (0), or only
external numbers (1).
0 = ICM/Trunk (Extension/Trunk Mode)
1 = Trunk Mode
1
15
Storage of Caller ID for answered
call
0 = Disable (Off)
1 = Enable (On)
1
16
Line Load Control Restriction
Enable/Disable an extension user
ability to make and receive calls
when the Line Load Control feature
is triggered.
Warning: When enabled, users
cannot make or receive internal
and external calls including 911
calls if the Line Load Control
feature is enabled and triggered..
0 = Disable (Not Restricted)
1 = Enable (Restricted)
0
18
Power-Saving Mode
0 = Normal mode
1 = Power-Saving Mode (Eco-Mode)
1 20-02-10
Item
No.
Item Input Data Default
Related
Program