NEC Univerge SV9100 - Page 230

Issue 4.0
2-190 Program 15 : Extension, Basic Setup
26
MSG Key Operation Mode
Determine whether an extension
MSG key should function as a
Message key or Voice Mail key. If
set as a Message key, users can
press the key to call the voice mail
only when they have new
messages.
0 = Message Key
1 = Voice Mail Key
0
27
Handset Volume
Determine how an extension
handset volume is set after it is
adjusted during a call.
 When 1 is assigned in this
program and a user sets the
volume to maximum, the volume is
reset to a level to meet FCC
standards when the user hangs
up.
0 = Back to Default (Back)
1 = Stay at previous level (Stay)
1
28
Message Waiting Lamp Color
Determine whether an extension
Message Waiting Lamp lights
Green or Red when a message is
received.
0 = Green
1 = Red
1 15-02-35
15-02-36
15-02-37
15-02-38
29
PB Back Tone Level
Allow adjustment of the PB Back
Tone Level when you are calling an
ISDN Line.
1~57 (-15.5dB ~ +12.5dB)
32
(0dB)
30
Toll Restriction Class
Select the Toll Restriction Class to
use when placing a call from a
virtual extension.
0 = Vir. Ext. (Virtual Extension Class)
1 = Real Ext. (Real Extension Class)
1
34
Call Register Mode
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
0 = Trunk Mode
1 = Extension/Trunk Mode
0
35
Message Waiting Lamp Cycle for
Calling Extension
Select the cycle method that the
Large LED flashes when the
extension has set Message
Waiting.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
7 15-02-28
15-02-36
15-02-37
15-02-38
Item
No.
Item Input Data Default
Related
Program