NEC Univerge SV9100 - Page 231

Issue 4.0
SV9100 Programming Manual 2-191
36
Message Waiting Lamp Cycle for
Called Extension
Select the cycle method that the
Large LED flashes when the
extension has Message Waiting set
to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
3 15-02-28
15-02-35
15-02-37
15-02-38
37
Voice Mail Message Wait Lamp
Color
Select the color of the Large LED
when a voice mail message is
waiting at the extension.
0 = Green
1 = Red
1 15-02-28
15-02-35
15-02-36
15-02-38
38
Voice Mail Message Wait Lamp
Cycle
Select the cycle method that the
Large LED flashes when the
extension has a VM Message
Waiting set to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
3 15-02-28
15-02-35
15-02-36
15-02-37
40
Additional Dial for Caller ID Call
Return
Enter the digits to be dialed in front
of the Caller ID when using the
Caller ID Return function.
Up to four digits (0, 1~9, #, )
10-02-04
41
Incoming Ring Setup
0 = Speaker Normal Ring
1 = Headset Ring
0
42
Incoming Off-Hook Ring Setup
0 = Speaker Off-Hook Ring
1 = Headset Off-Hook Ring
0
43
Headset Ring Duration
0 = No Switch to Speaker Ring
1 = 10 seconds
2 = 20 seconds
3 = 30 seconds
4 = 40 seconds
5 = 50 seconds
6 = 1 minute
0
44
Reversing Display Indication
The display on the DT800/DT700/
DT400/DT300 style telephones can
be set to Normal or Reversed.
0 = Normal Indication
1 = Reversing Indication
0
Item
No.
Item Input Data Default
Related
Program