NEC Univerge SV9100 - Page 244

Issue 4.0
2-204 Program 15 : Extension, Basic Setup
Conditions
 15-05-04 – Nickname must be unique in the system.
Feature Cross Reference
None
48
Subscribe
Expire Timer
for NAT
0 = Disable
60 ~ 65535(sec)
180
On a per station basis, this
setting defines the SIP
Subscribe expiry timer. If this
value is set to 0, for a NAPT
terminal, the value in PRG
84-23-02 is applied.
Note: Version 9000 or higher
is required.
10-46-14
49
Receiving SIP
INFO
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is
not available
1
Select whether or not
system can receive DTMF
from standard SIP phone via
SIP INFO message. There
are two receive types.
1=’Allowed any time' can
receive a SIP INFO
message from a standard
SIP phone as a dial
information any time.
'2=Allowed while RTP is not
available' can receive a SIP
INFO message before
establishing RTP
connection.
50
Peer to Peer
Mode
Off = Disable
On = Enable
1
On a per station basis
enable or disable Peer to
Peer mode.
51
Transport
Protocol
0 = UDP
1 = TCP
0
This program shows the
transport protocol for
selected SIP terminal.
Read Only.
Item
No.
Item Input Data Default Description
Related
Program