NEC Univerge SV9100 - Page 65

Issue 4.0
SV9100 Programming Manual 2-25
04 Time Zone
0~24 (0 = -12 Hours and 24 = +12 Hours)
+7
(-5 hours)
Determine the
offset from
Greenwich Mean
Time (GMT) time.
Then enter its
respective value.
For example,
Eastern Time (US
and Canada) has
a GMT offset of -5.
The program data
would then be 7
(0= -12, 1= -11,
2= -10, 3= -9, 4= -
8, 5= -7, 6= -6, 7=
-5, ……24= +12)
05
NIC
Interface
0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
5 = 1Gbps, Full Duplex
0
NIC Auto
Negotiate
(GCD-CP10)
07
NAPT
Router IP
Address
(Default
Gateway
[WAN])
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
Set the IP address
on the WAN side
of router.
08
ICMP
Redirect
0 = Enable
1 = Disable
0
0 = signaling
packets WILL
follow ICMP
redirect
messages.
1 = signaling
packets WILL
NOT follow ICMP
redirect
messages.
 for voice packets
and ICMP refer
to PRG 84-27-
14.
09
IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
Input Data (Continued)
Item
No.
Item Input Data Default Description