NEC Univerge SV9100 - Page 66

Issue 4.0
2-26 Program 10 : System Configuration Setup
10
Subnet
Mask
128.0.0.0 192.0.0.0 224.0.0.0
240.0.0.0 248.0.0.0 252.0.0.0
254.0.0.0 255.0.0.0 255.128.0.0
255.192.0.0 255.224.0.0 255.240.0.0
255.248.0.0 255.252.0.0 255.254.0.0
255.255.0.0 255.255.128.0 255.255.192.0
255.255.224.0 255.255.240.0 255.255.248.0
255.255.252.0 255.255.254.0 255.255.255.0
255.255.255.128 255.255.255.192 255.255.255.224
255.255.255.240 255.255.255.248 255.255.255.252
255.255.255.254 255.255.255.255
255.255.0.0
11
NIC Setup 0 = Auto Detect
1 = 100Mbps, Full Duplex
3 = 10Mbps, Full Duplex
5 = 1 Gbps, Full Duplex
0
Set for GPZ-IPLE
13
DNS
Primary
Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
Set for adding a
function for DNS.
14
DNS
Secondary
Address
15
DNS Port 0~65535
53
17
IPL NIC Port
Setting
0 = MDI
1 = MDI-X
0
18
GCD-CP10
Network
Setup -
CCPU MTU
1000~1500
1450
Define the MTU
size for the
packets sent from
IP address
defined in PRG
10-12-01.
19
GCD-CP10
Network
Setup - IPL
MTU
1000~1500
1450
Define the MTU
size for the
packets sent from
IP address
defined in PRG
10-12-09.
Input Data (Continued)
Item
No.
Item Input Data Default Description