Issue 4.0
SV9100 Programming Manual 2-833
70 2 0 SIP Stack
Reconfig
Report
71 2 0CID Buffer
Threshold
When the number of CID
records is over the limit,
CID buffer threshold alarm
(71) can be reported.
72~73 --- Reserved ---
74 2 0 TLS SIP Error
Information
1. License is insufficient 2.
Error in CA Certificate.
2. Error in CA
Certificate.(PRG 84-14-22)
3. Error in Server
Certificate (PRG 10-72-01)
4. Error in Private Key
(PRG 10-72-02)
5. Error in Server
Authentication
a. The cert. not yet valid.
b. The cert. has expired.
c. Self-signed cert.
d. Can’t prove server.
1. Encryption
license is not
installed.
2. Failed to validate
CA Certificate.
3. Failed to validate
Server Certificate.
4. Failed to validate
Private Key.
5. Failed to
authenticate
Server.
a and b. The
certificate of PRG
84-14-22 is not yet
valid or is expired.
or the certificate
received from SIP
server is not yet
valid or is expired.
c. The certificate
received from SIP
server is Self-
Signed certificate
and same
certificate is not set
at PRG 84-14-22.
d. Can’t prove
server with using a
certificate of PRG
84-14-22
1. ERR/
REC
2. WAR
3. WAR
4. WAR
5. WAR
75 --- Reserved ---
76 SIP Server
Keep Alive
Timer
77~79 --- Reserved ---
80 1 0 NetLink start
error.
The error occurred when
NetLink started.
Defective
GCD-CP10.
1. Possibility of
defective hardware.
2. Check with maker.
ERR
81 2 0 NetLink call
trouble
information.
1. The trouble occurred in
the NetLink relation.
2. The DSP resource was
not acquired at
incoming/outgoing.
GPZ-IPLE DSP not
acquired.
1. Confirm wiring and
system data settings.
2. Check with maker on
uncertain points.
WAR
Alarm
No.
Type Report Name Content of Alarm Cause Action Recovery
Alarm
Status
To Next Page
Loading...
