Datalogic Magellan 9800i User Manual

Enter/Exit Programming Mode
Product Reference Guide 229
Label ID (continued)
Default Label ID for this symbology is:
45 = E
002F(CR)
Set UPC-E 2-Digit Supplemental Label ID
0030(CR)
Set UPC-E 5-Digit Supplemental Label ID
Default Label ID for this symbology is:
45 = E
Default Label ID for this symbology is:
46 = F
0027(CR)
Set EAN-13 Label ID
0031(CR)
Set EAN-13 2-Digit Supplemental Label ID
Default Label ID for this symbology is:
46 = F
Default Label ID for this symbology is:
46 = F
0032(CR)
Set EAN-13 5-Digit Supplemental Label ID
0026(CR)
Set EAN-8 Label ID
Default Label ID for this symbology is:
4646 = FF
Default Label ID for this symbology is:
4646 = FF
0033(CR)
Set EAN-8 2-Digit Supplemental Label ID

Datalogic Magellan 9800i Specifications

General

Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Power consumption (typical)	12 W
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Built-in display	No

Weight and Dimensions

Weight	- g