Datalogic Magellan 9800i User Manual

Enter/Exit Programming Mode
230 Magellan™ 9800i Scanner
Label ID (continued)
0034(CR)
Set EAN-8 5-Digit Supplemental Label ID
Default Label ID for this symbology is:
4646 = FF
Default Label ID for this symbology is:
47 = G
0560(CR)
Set GTIN Label ID
0561(CR)
Set GTIN 2-Digit Supplemental Label ID
Default Label ID for this symbology is:
4732 = G2
Default Label ID for this symbology is:
4735 = G5
0562(CR)
Set GTIN 5-Digit Supplemental Label ID
0563(CR)
Set GTIN Code 128 Supplemental Label ID
Default Label ID for this symbology is:
4738 = G8
Default Label ID for this symbology is:
5234 = R4
04DA(CR)
Set DataBar Omnidirectional Label ID
0366(CR)
Set DataBar Omnidirectional Composite Label ID
Default Label ID for this symbology is:
5234 = R4

Datalogic Magellan 9800i Specifications

General

Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Power consumption (typical)	12 W
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Built-in display	No

Weight and Dimensions

Weight	- g