308-06-114 Manual Transaxle External Controls 308-06-114
DESCRIPTION AND OPERATION
E1170 EN 07/2001
External Controls
Overview - Gearshift Mechanism
Item
Description
1 Shift rod
2 Boot - shift rod
3 Inner boot - gear lever
4 Gear lever
5 Mounting sleeve - gear lever
6 Noise damping pad
7 Gearshift mechanism housing top
cover
8 Gearshift mounting
9 Gearshift mechanism housing lower
cover
10 Gearshift stabiliser
A selector rod operates the iB5 manual
transmission in the 2002 Bantam.
In order to isolate the outer gearshift mechanism
from the bodywork, the gearshift housing is
located in the gearshift mounting. This mounting
can move lengthways to balance the rotational
movements of the engine / transmission.
The gearshift housing is rigidly joined to the
transmission by the gearshift stabiliser.
To Next Page
Loading...
