Ford 2002 Bantam - Heater Control Valve (34 328 0)

412-02-16 Heating and Ventilation 412-02-16
REMOVAL AND INSTALLATION
E1245 EN 07/2001 2002 Bantam
Heater Control Valve (34 328 0)
Removal
1. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
CAUTION: Disconnect the battery nega-
tive lead.
2. Detach the coolant expansion tank.
• Remove the single screw.
• Unhook the coolant expansion tank from
its bracket.
3. Remove the bulkhead extension.
• Remove the rubber seal.
• Unclip the cover of the central junction
box (CJB).
• Remove the single screw.
4. Remove the bulkhead extension
(continued).
1. Remove the bolts.
2. Disconnect the plug.