414-02-3 Generator and Regulator 414-02-3
REMOVAL AND INSTALLATION
E6745 EN 07/2001 2002 Bantam
Generator — Vehicles with 1.6L / 1.3L Engine (31 414 0)
Removal
All vehicles
1. Disconnect the battery ground cable.
For additional information,
refer to Section 414-01.
2. Remove the accessory drive belt.
1. Rotate the belt tensioner clockwise.
2. Remove the accessory drive belt.
3. Disconnect the generator electrical
connectors.
4. Remove the generator upper retaining
bolts.
BACK TO CHAPTER INDEX
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
To Next Page
Loading...
