412-00-2 Climate Control System — General Information 412-00-2
DESCRIPTION AND OPERATION
Climate Control System
Instead of Bowden cables, air distribution is
controlled via a splined shaft and the interior
temperature is regulated via a potentiometer,
which is integrated into the control panel. The
potentiometer operates the control valve, which
controls the flow of hot water through the heat
exchanger in accordance with the selected
interior temperature.
The heat exchanger and (depending on the
model variant) the air conditioning evaporator are
easily accessible from the engine compartment.
The vehicle is also equipped with recirculated air
mode, which can be activated by operating a
switch on the control panel.
E1232 EN 07/2001 2002 Bantam
To Next Page
Loading...
