412-02-4 Heating and Ventilation 412-02-4
REMOVAL AND INSTALLATION
E1248 EN 07/2001 2002 Bantam
Blower Motor (34 374 0)
Special Tool(s)
Separator, quick-fit coupling
5/8" (black)
412-038 (34-003)
Material
Specification
O-rings (Green)
Adhesive butyl rubber
strips (6 off, if required)
Sealer (if required)
Removal
Vehicles with air conditioning
NOTE: Observe the Health and Safety regula-
tions for working with refrigerant. For additional
information, refer to Section 100-00.
1. Drain the air conditioning system.
For additional information,
refer to Section 412-00.
All vehicles
2. Detach the coolant expansion tank.
• Remove the single screw.
• Unhook the coolant expansion tank from
its bracket.
Vehicles with diesel engine
3. Release the air cleaner intake pipe.
• Undo the hose clip.
• Lay the intake pipe to one side.
To Next Page
Loading...
