206-07-4 Power Brake Actuation 206-07-4
REMOVAL AND INSTALLATION
E9401 EN 07/2001 2002 Bantam
Brake Booster (12 451 0)
Removal
1. Remove the battery tray. For additional
information, refer to Section 414-01.
2. Remove the brake master cylinder.
For additional information,
refer to Section 206-06.
3. Disconnect the vacuum hose from the
brake booster.
4. Detach the brake booster.
5. Detach the brake booster actuating rod
from the brake pedal.
1. Pull the brake booster forwards.
2. Remove the actuating rod clip and pin.
6. Remove the brake booster.
To Next Page
Loading...
