303-03-193 Engine Cooling 303-03-193
REMOVAL AND INSTALLATION
E1001 EN 09/2001 2002 Bantam
Coolant Expansion Tank (24 284 0)
Removal
1. Drain the cooling system. For additional
information,
refer to Cooling System Draining, Filling
and Bleeding. In this section
2. Disconnect the expansion tank hoses.
1. Disconnect the radiator to expansion
tank hose.
2. Disconnect the engine to expansion tank
hose.
3. Disconnect the engine supply hose.
3. Remove the expansion tank.
1. Remove the expansion tank retaining
screw.
2. Remove the expansion tank from the
supporting bracket.
Installation
1. To install, reverse the removal procedure.
2. Refill the cooling system. For additional
information,
refer to Cooling System Draining, Filling
and Bleeding. In this section
To Next Page
Loading...
