211-04-89 Steering Column 211-04-89
REMOVAL AND INSTALLATION
Steering Wheel (13 524 0)
Removal
1. Remove the air bag module. For additional
information, refer to Section 501-20B.
2. Centre the steering wheel and lock in
position.
3. NOTE: Turn the ignition key to position I to
remove the steering wheel and return to
position 0 when removed.
Remove the steering wheel.
1. Disconnect the air bag sliding contact
electrical connector.
2. Remove the steering wheel retaining
bolt.
4. Remove the air bag sliding contact.
For additional information,
refer to Section 501-20B.
Installation
1.
WARNING: When installing the
steering wheel make sure that the air
bag sliding contact tangs engage
correctly over the steering column.
CAUTION: Make sure the steering is in
the straight ahead position.
To install, reverse the removal procedure.
E1222 EN 07/2001 2002 Bantam
To Next Page
Loading...
