412-03-23 Air Conditioning 412-03-23
REMOVAL AND INSTALLATION
Low Pressure Cut-Off Switch (34 629 0)
Removal
NOTE: "Safety Regulations". For additional i
formation, refer to Section 100-00.
n-
1. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
• Place protective covers over the fenders.
CAUTION: Disconnect the battery nega-
tive lead.
2. Detach the coolant expansion tank.
• Remove the single screw.
• Unhook the coolant expansion tank from
its bracket.
3. Remove the bulkhead extension.
• Remove the rubber seal.
• Unclip the central junction box (CJB)
cover.
• Remove the single screw.
4. Remove the bulkhead extension
(continued).
1. Remove the bolts.
2. Unclip the electrical connector.
E1261 EN 07/2001 2002 Bantam
To Next Page
Loading...
