412-02-12 Heating and Ventilation 412-02-12
REMOVAL AND INSTALLATION
E1247 EN 07/2001 2002 Bantam
Heater Core (34 364 0)
Special Tool(s)
Disconnecting tool,
refrigerant line 5/8" (black)
34-003
Material
Specification
O-rings (Green)
Removal
NOTE: "Health and Safety Regulations". For
additional information, refer to Section 100-00.
1. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
• Place protective covers over the fenders.
Vehicles with air conditioning
2. Drain the air conditioning system.
For additional information,
refer to Section 412-03.
CAUTION: Disconnect the battery nega-
tive lead.
3. Detach the coolant expansion tank.
• Remove the single screw.
• Unhook the coolant expansion tank from
its bracket.
To Next Page
Loading...
