Ford 2002 Bantam - Engine Coolant Temperature (ECT) Sensor (21 190 0)

303-14D-228 Electronic Engine Controls — Diesel Engine 303-14D-228
REMOVAL AND INSTALLATION
E1037 EN 09/2001 2002 Bantam
Engine Coolant Temperature (ECT) Sensor (21 190 0)
Removal
1. Drain the cooling system. For additional
information, refer to Section 303-03.
2. Disconnect the engine coolant temperature
sensor electrical connector.
3. Remove the sensor.
Installation
1. To install, reverse the removal procedure.