413-01-22 Instrument Cluster 413-01-22
REMOVAL AND INSTALLATION
Instrument Cluster Printed Circuit (33 224 4)
Removal
1. Remove the instrument cluster.
Refer to the procedure
in this section.
2. Remove the lens.
1. Remove the two bulbs.
2. Release the retaining lugs and remove
the lens.
3. Remove the tachometer.
4. Remove the fuel / temperature gauge.
E1284 EN 09/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
To Next Page
Loading...
