303-14D-227 Electronic Engine Controls — Diesel Engine 303-14D-227
REMOVAL AND INSTALLATION
E4569 EN 09/2001 2002 Bantam
Crankshaft Position (CKP) Sensor — Vehicles wi th 1.8L Endura DE
Diesel Engine (29 230 0)
Removal
1. Raise and support the vehicle. For
additional information,
refer to Section 100-02.
2. Disconnect the crankshaft position (CKP)
sensor electrical connector.
3. Remove the CKP sensor.
Installation
1. To install, reverse the removal procedure.
To Next Page
Loading...
