417-01-51A Exterior Lighting 417-01-51A
DIAGNOSIS AND TESTING
Parking, Rear and License Lamps
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of
mechanical or electrical damage.
Visual Inspection Chart
Electrical
• Fuse(s).
• Bulb(s).
• Wiring harness.
• Electrical connector(s).
3. If an obvious cause for an observed or
reported concern is found, correct the cause
(if possible) before proceeding to the next
step.
4. If the cause is not visually evident, verify the
symptom and refer to the Symptom Chart.
Symptom Chart
Condition
Possible Sources
Action
• One or more parking, rear or
license plate lamp(s) is/are in-
operative.
• Fuse(s).
• Bulb(s).
• Circuit(s)
• Headlamp, left-hand side / right-
hand side.
• Rear lamp assembly, left-hand
side / right-hand side.
• License plate lamp.
• Go To Pinpoint Test N
• The parking, rear or license
plate lamps are on continuously.
• Circuit(s).
• Multifunction switch.
• Central Junction Box (CJB).
• Go To Pinpoint Test O
• The parking, rear or license
plate lamps are inoperative.
• Fuse.
• Circuit(s).
• Multifunction switch.
• Central Junction Box (CJB).
• Go To Pinpoint Test P
E9427 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED
To Next Page
Loading...
