Ford 2002 Bantam - Tube - Rear Axle - Replace (15 730 0)

204-02-7 Rear Suspension 204-02-7
REMOVAL AND INSTALLATION
E6582 EN 06/2001 2002 Bantam
Tube - Rear Axle - Replace (15 730 0)
Removal
1. Jack up the rear of the vehicle, fit
stands under the body and chock the
front wheels. For additional information,
refer to Section 100-02
NOTE: It is essential that the vehicle does not
exceed the maximum kerb weight if it is to be
raised and supported on the axle tube.
3. Remove the brake drum and hub assembly
from the axle flange, four bolts.
NOTE: Protect the hub from dust and dirt.
4. Remove the two rivets securing the brake
carrier plate assembly to the rear axle and
remove the carrier assembly.
NOTE: Support the brake carrier assembly
to prevent damage to the brake flexible
hoses.
2. Remove the rear wheels and the brake
hoses from the axle tube bracket.