308-03-73 Manual Transaxle 308-03-73
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
E1163 EN 07/2001
Selector Plate (16 284 5)
Special Tool(s)
Draw hammer
205-102 (15-053)
Special Tool(s)
Remover and installer, shift
rod oil seal
308-040 (16-019)
Material
Specification
Universal sealant (Hylomar)
Disassembly
1. Remove the shift rod oil seal.
• Pull off the boot.
2.
CAUTION: The shift gate is set in
production. If it is undone a Service
shift gate must be installed in its
place.
Remove the auxiliary shift rod.
1. Remove the bolts from the relay lever
mounting.
2. Remove the auxiliary shift rod together
with the relay levers.
To Next Page
Loading...
