303-04D-5 Fuel Charging and Controls — 1.8L Diesel Engine 303-04D-5
GENERAL PROCEDURES
E6450 EN 09/2001 2002 Bantam
Idle Speed Adjustment (23 413 0) (Vehicles Without Air Conditioning)
NOTE: This adjustment must be carried out with
the engine at normal operating temperature.
1. Connect a tachometer to the engine in
accordance with the manufacturer's
instructions.
2. Start the engine and allow it to idle.
3. Loosen the idle speed adjustment screw
lock nut.
4. Adjust the idle speed screw as necessary
(refer to Specifications contained in this section).
5. Tighten the idle speed adjustment screw lock
nut.
6. Check to ensure the idle speed is still within
specification.
7. Momenentarily move the idle lever away from
the stop.
8. Check to ensure the idle speed is still within
specification.
9. Switch the engine off.
10. Disconnect the tachometer from the engine.
To Next Page
Loading...
