303-01B-77 Engine — 1.6L / 1.3L RoCam 303-01B-77
REMOVAL
E6642 EN 07/2001 2002 Bantam
Engine (21 132 0)
General Equipment
Retaining strap
Assembly stand
Removal
All vehicles
1. General notes.
• The locations of the engine mountings
and the engine support insulators are
described looking from the transaxle to
the engine.
• Steps, which apply only to particular
variants, are indicated with a note.
• If necessary, cut the cable ties and install
new during installation.
2. Remove the battery. For additional
information,
refer to Section 414-01.
3. Remove the battery tray.
1. Cut the cable ties.
2. Remove the bolts.
4. Remove the air cleaner intake pipe.
To Next Page
Loading...
