303-03-180 Engine Cooling 303-03-180
REMOVAL AND INSTALLATION
E5887 EN 09/2001 2002 Bantam
Thermostat — Vehicles with 1.8L Endura DE Diesel Engine (24 454 0)
Special Tool(s)
Remover/Installer, cooling
hose clamp
24-003
Removal
1. Drain the cooling system.
Refer to the procedure in this section.
2. Disconnect the coolant hose.
3. Remove the thermostat housing.
4. Remove the thermostat.
To Next Page
Loading...
