Ford 2002 Bantam - Strut and Spring Assembly (14 781 0)

204-01-19 Front Suspension 204-01-19
REMOVAL AND INSTALLATION
E1060 EN 06/2001 2002 Bantam
Strut and Spring Assembly (14 781 0)
Special Tool(s)
Lever, Wheel Knuckle
204-159 (14-039)
Removal
All Vehicles
1. Loosen the front wheel nuts.
2. Raise and support the vehicle. For
additional information,
refer to Section 100-02.
3. Remove the front wheel.
4
. Detach the stabiliser bar connecting link
and the flexible brake hose from the
suspension unit.
5.
CAUTION: Secure the caliper and
anchor plate assembly out of the way
to prevent damage to the flexible
brake hose.
Detach the caliper and anchor plate
assembly.