Ford 2002 Bantam - Engine ASSEMBLY; Engine (21 134 8)

303-01B-104 Engine — 1.6L / 1.3L RoCam 303-01B-104
ASSEMBLY
E6645 EN 07/2001 2002 Bantam
Engine (21 134 8)
Special Tool(s)
Universal Flange Holding
Tool
205-072 (15-030 A)
Lifting Bracket, Engine
303-122 (21-068 A)
Angle gauge
303-174 (21-540)
Socket, Cylinder Head Bolt
303-392 (21-167)
Mounting Stand
303-435 (21-187)
Mounting Bracket
303-435-06 (21-031 B)
Special Tool(s)
Mounting Plate
303-435-11 (21-146 C)
General Equipment
Assembly stand
Cable ties
Wire
Piston ring compressor
Material Specification
Engine oil SAE 15W 40 SH
Sealer Loctite 5910
Sealer Loctite 648
Assembly
1. Measure the crankshaft. For additional
infor
mation, refer to Section 303-00.
2. Measure the camshaft. For additional
infor
mation, refer to Section 303-00.
3. Measure the cylinder bore. For additional
infor
mation, refer to Section 303-00.
4. Measure the pistons. For additional
information, refer to Section 303-00.
Installer, Oil Seal
303-656 (21-233)