Ford 2002 Bantam - Front Safety Belt Retractor (40 222 0)

501-20A-5 Occupant Restraints — Active 501-20A-5
REMOVAL AND INSTALLATION
Front Safety Belt Retractor (40 222 0)
Removal
1.
CAUTION: The bolt securing the safety
belt anchor is held captive by a paper
washer. The bolt, spacer and paper
washer must remain on the safety
belt anchor at all times when the
safety belt is detached or removed.
Detach the safety belt lower anchor from
the floor panel.
2.
CAUTION: The bolt securing the safety
belt anchor is held captive by a paper
washer. The bolt, spacer and paper
washer must remain on the safety
belt anchor at all times when the
safety belt is detached or removed.
Detach the safety belt upper anchor from
the B-pillar.
1. Detach the trim panel.
2. Remove the retaining bolt.
3. Detach the door opening weather strips.
08/2001 2002 Bantam