501-20A-6 Occupant Restraints — Active 501-20A-6
REMOVAL AND INSTALLATION (CONTINUED)
4. Detach the cowl side trim panel.
• Using a suitable screwdriver remove the
four lower clips.
5. Remove the cowl side trim panel.
• Using a suitable screwdriver remove the
two front clips.
6. Remove the front safety belt retractor.
1. Remove the retaining bolt.
2. Lift the retractor to detach the locating
tang.
Installation
1. To install, reverse the removal procedure.
08/2001 2002 Bantam
To Next Page
Loading...
