Ford 2002 Bantam - Valve Clearance (21 213 0)

303-01D-165 Engine — 1.8L Diesel - Endura DE 303-01D-165
GENERAL PROCEDURES
E5885 EN 09/2001 2002 Bantam
Valve Clearance (21 213 0)
Special Tool(s)
Compressor, bucket tappets
21-106
Pliers, valve adjustment
shims
21-107
Remover/installer, cooling
hose clamp
24-003
General Equipment
Feeler gauge
Material Specification
Valve shims
Sealer SPM-4G-9112-F/G
1. General note.
• When removing and installing coolant
and ventilation hoses, if necessary. For
additional information,
refer to Section 303-03.
2. Remove the cylinder head cover.
1. Detach the crankcase ventilation hoses.
2. Remove the screws.
3. Remove the oil baffle.