Ford 2002 Bantam - Pedal Eases down Slowly

206-00-10 Brake System — General Information 206-00-10
DIAGNOSIS AND TESTING (CONTINUED)
E1092 EN 07/2001 2002 Bantam
C
ONDITIONS DETAILS/RESULTS/ACTIONS
D4: CHECK FOR BRAKE SYSTEM LEAKS
1 Check for external brake and clutch system
component tests in this section.
• A
re any leaks found?
 Yes
REPA
IR as necessary. ADD fluid and
BLEED the brake system.
REFER to Section 206-00.
TEST the system for normal operation.
 No
GO
TO D5
D5: PERFORM A BRAKE MASTER CYLINDER BYPASS CONDITION CHECK
1 Test for a brake master cylinder bypass.
Refer to the brake master cylinder component
tests in this section.
• Was a concern found?
 Yes
INS
TALL a new brake master cylinder. ADD
fluid and BLEED the brake system.
REFER to Section 206-00.
TEST the system for normal operation.
 No
Syst
em OK.
PINPOINT TEST E: PEDAL EASES DOWN SLOWLY
CONDITIONS DETAILS/RESULTS/ACTIONS
E1: CHECK BRAKE PEDAL OPERATION
1 Check if the condition occurs when applying
the brake pedal while the vehicle is moving.
• Does the condi
tion occur with the vehicle
s
tationary?
 Yes
GO
TO E2
 No
Re
fer to the brake master cylinder
component tests in this section.
E2: CHECK FOR BRAKE SYSTEM LEAKS
1 Check for external brake system leaks
Refer to the master cylinder component tests
in this section.
• A
re any leaks found?
 Yes
REPA
IR as necessary. ADD fluid and
BLEED the brake system.
REFER to Section 206-00.
TEST the system for normal operation.
 No
GO TO E3
leaks
Refer to brake master cylinder