Ford 2002 Bantam - Single Power Window Is Inoperative - Driver Side

501-11-3 Glass, Frames and Mechanisms 501-11-3
DIAGNOSIS AND TESTING
PINPOINT TEST A: SINGLE POWER WINDOW IS INOPERATIVE - DRIVER SIDE
CONDITIONS DETAILS/RESULTS/ACTIONS
A1: CHECK THE DRIVER POWER WINDOW CONTROL SWITCH LEDS
1.
• Do the driver power window control switch
LEDs illuminate?
 Yes
GO TO A2
 No
GO TO A5
A2: CHECK THE DRIVER POWER WINDOW MOTOR CIRCUIT FOR CONTINUITY
1. 2.
Driver Window Con-
trol Switch C55a
3 Measure the resistance between the driver
power window control switch C55a pin 1, circuit
32-AJ26 (WH) and pin 7, circuit 33-AJ26 (YE)
harness side.
• Is the resistance less than 5 ohms?
 Yes
VERIFY the customer concern.
 No
GO TO A3
A3: CHECK FOR CONTINUITY BETWEEN THE DRIVER POWER WINDOW CONTROL SWITCH
AND THE DRIVER POWER WINDOW MOTOR DOWN CIRCUIT
1.
Power Window
Motor C106
E9411 EN 08/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED
BACK TO CHAPTER INDEX