206-06-13 Hydraulic Brake Actuation 206-06-13
REMOVAL AND INSTALLATION
E9362 EN 03/2001 2002 Bantam
Brake Pedal and Bracket
Removal
1. Disconnect the battery ground cable.
For additional information,
refer to Section 414-01
.
2. Disconnect the brake pedal position (BPP)
switch and clutch on/off switch electrical
connectors from the brake pedal bracket.
3. Remove the steering linkage bolt.
4. Disconnect the accelerator cable from the
accelerator pedal.
To Next Page
Loading...
