303-04D-27 Fuel Charging and Controls — 1.8L Diesel Engine 303-04D-27
REMOVAL AND INSTALLATION (CONTINUED)
E6446 EN 09/2001 2002 Bantam
Fuel Injection Delivery Pipes
WARNING: This procedure in-
volves fuel handling. Be prepared for fuel
spillage at all times and always observe
fuel handling precautions.
CAUTION: Diesel fuel injection
equipment is manufactured to very precise
tolerances and fine clearances. It is there-
fore essential that absolute cleanliness be
observed when working with these com-
ponents. Always fit blanking plugs to any
open orifices or pipes.
Removal
1. Disconnect the battery ground cable.
2. Remove the four fuel injector leak-off pipes.
3. Detach the fuel supply pipe from the two
retaining clips.
4. Unscrew the four fuel injector delivery pipe
unions from the fuel injection pump.
To Next Page
Loading...
