206-05-12 Parking Brake and Actuation 206-05-12
GENERAL PROCEDURES
E1114 EN 07/2001 2002 Bantam
Parking Brake Cable Adjustment (12 662 0)
Adjustment
1. Remove the parking brake control cover
trim.
2. Lower the parking brake control lever.
3. Loosen the adjusting nut.
4. Depress the foot brake six times.
5. Adjust the parking brake cable.
1. Raise the parking brake control lever by
six clicks of the ratchet.
2. Tighten the adjusting nut.
6. Test the parking brake for normal operation.
7. Install the parking brake control cover trim.
To Next Page
Loading...
