417-01-9 Exterior Lighting 417-01-9
DIAGNOSIS AND TESTING (CONTINUED)
Pinpoint Tests
PINPOINT TEST A: BOTH HEADLAMPS ARE INOPERATIVE
CONDITIONS
DETAILS/RESULTS/ACTIONS
A1: CHECK THE FUSE F9
1.
2.
Fuse F9 (CJB)
3 South Africa: Check the fuse F9 (5 A).
• Is the fuse OK?
Yes
GO TO A2
No
INSTALL a new fuse F9 (20 A) or F9 (5 A).
If the fuse blows again, LOCATE and
REPAIR the short circuit by using the wiring
diagrams. TEST the system for normal op-
eration.
A2: CHECK THE POWER SUPPLY OF FUSE F9
1.
Fuse F9 (CJB)
2.
3 Measure the voltage between fuse F9 (5 A) or
(20 A) and ground.
• Is battery voltage indicated?
Yes
GO TO A3
No
REPAIR the power supply of fuse F9, by us-
ing the wiring diagrams. TEST the system
for normal operation. If necessary INSTALL
a new CJB.
E9418 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL