Ford 2002 Bantam - Exterior Mirror (Electrically Operated)

501-09-9 Rear View Mirrors 501-09-9
REMOVAL AND INSTALLATION
Exterior Mirror (Electrically operated)
Removal
1. Remove the exterior mirror trim panel.
1. Remove the screw cover.
1. Remove the retaining screw.
1. Remove the front door trim panel. For
additional information, refer to Section 501-
05.
3.
CAUTION: Do not touch the adhesive
surfaces, as re-bonding will be
impaired.
Detach the watershield from the door panel.
• Using a plastic knife (disposable cutlery),
cut through the Butyl strip to enable the
watershield to be peeled back.
1. Disconnect the mirror control switch
electrical connector.
07/2001 2002 Bantam