501-09-8 Rear View Mirrors 501-09-8
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
2 Measure the resistance between the exterior
mirror control switch C325 pin 3, circuit 9-AD1
(BN/RD) and pin 7, circuit 8-AD10 (WH/BK)
harness side.
• Is the resistance less than 50 ohms?
Yes
VERIFY the customer concern.
No
GO TO C7
C7: CHECK CIRCUIT 8-AD10 (WH/BK) FOR CONTINUITY
1.
Passenger Exte-
rior Mirror C311
2 Measure the resistance between the exterior
mirror control switch C325 pin 7, circuit 8-AD10
(WH/BK) harness side, and the passenger
exterior mirror C311 pin 3, circuit 8-AD10
(WH/BK) harness side.
• Is the resistance less than 5 ohms?
Yes
INSTALL a new exterior mirror. TEST the
system for normal operation.
No
REPAIR circuit 8-AD10 (WH/BK). TEST the
system for normal operation.
07/2001 2002 Bantam
To Next Page
