501-09-7 Rear View Mirrors 501-09-7
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
2 Measure the resistance between the exterior
mirror control switch C325 pin 3, circuit 9-AD1
(BN/RD) and pin 1, circuit 10-AD11 (GY/WH)
harness side.
• Is the resistance less than 50 ohms?
Yes
VERIFY the customer concern.
No
GO TO C5
C5: CHECK CIRCUIT 10- D11 (GY/WH) FOR CONTINUITY A
1.
Passenger Exte-
rior Mirror C311
2 Measure the resistance between the exterior
mirror control switch C325 pin 1, circuit 10-
AD11 (GY/WH) harness side, and the
passenger exterior mirror C311 pin 2, circuit
10-AD11 (GY/WH) harness side.
• Is the resistance less than 5 ohms?
Yes
INSTALL a new exterior mirror. TEST the
system for normal operation.
No
REPAIR circuit 10-AD11 (GY/WH). TEST
the system for normal operation.
C6: CHECK THE PASSE GER EXTERIOR MIRROR LEFT/RIGHT CIRCUIT N
1.
Exterior Mirror
Control Switch
C325
07/2001 2002 Bantam
To Next Page
Loading...
