Ford 2002 Bantam - Page 1449

501-09-6 Rear View Mirrors 501-09-6
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
2 Measure the resistance between the exterior
mirror control switch C325 pin 3, circuit 9-AD1
(BN/RD) and pin 2, circuit 10-AD8 (GY/VT)
harness side.
• Is the resistance less than 50 ohms?
 Yes
VERIFY the customer concern.
 No
INSTALL a new exterior mirror. TEST the
system for normal operation.
C3: CHECK THE DRIVER EXTERIOR MIRROR LEFT/RIGHT CIRCUIT
1.
Exterior Mirror
Control Switch
C325
2 Measure the resistance between the exterior
mirror control switch C325 pin 3, circuit 9-AD1
(BN/RD) and pin 5, circuit 8-AD7 (WH/RD)
harness side.
• Is the resistance less than 50 ohms?
 Yes
VERIFY the customer concern.
 No
INSTALL a new exterior mirror. TEST the
system for normal operation.
C4: CHECK THE PASSENGER EXTERIOR MIRROR UP/DOWN CIRCUIT
1.
Exterior Mirror
Control Switch
C325
07/2001 2002 Bantam