211-05-102 Steering Column Switches 211-05-102
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
C4: CHECK FOR OPEN ON CIRCUITS 15 (GN) AND 15 (GN/BU)
1.
Ignition switch
2 Measure the voltage between ignition relay
C47 pin 1, circuit 15 (GN) and 15 (GN/BU) and
ground
• Is the voltage greater than 10 volts?
Yes
GO TO C5
No
Repair circuit 15 (GN) or 15 (GN/BU). TEST
the system for normal operation.
C5: CHECK THE IGNITION RELAY GROUND
1.
Interior light relay
2.
Ignition switch
3 Measure the resistance between the ignition
relay C47 pin 2, circuit 31 (BK) and ground.
• Is the resistance less than 5 ohms?
Yes
GO TO C6
No
Repair circuit 31 (BK). TEST the system for
normal operation.
C6: CHECK THE IGNITION RELAY POWER FEED
1.
Interior light relay
E1227 EN
07/2001 2002 Bantam
To Next Page
Loading...
